GYEON Q2M PPF Wash - Contamination Removing Car Shampoo for PPF Films

Gyeon Q²M PPF Wash is a highly effective decontamination car shampoo that can dissolve moderate iron deposits from any automotive paint or PPF film without the need to use clay. Q²M PPF Wash is highly effective against iron contamination on polyurethane film and remains a safe shampoo on other exterior surfaces of the car (windows, plastics, alloy wheels). Its composition additionally ensures abundant foam for smooth and comfortable washing. Q²M PPF Wash is a 3-in-1 product - it washes, decontaminates and restores the original properties of PPF or wrap film. It can be used as an active foam or traditional shampoo, making it a versatile maintenance solution for your vehicle. Q²M PPF Wash is excellent as a cleaner not only for paint, but also for alloy wheels. Because it is super slippery, it allows safe washing of all types of alloy wheels.

• Decontamination car shampoo for PPF films, wrap films or paint itself.
• Can dissolve moderate iron deposits.
• Foams abundantly and is extra slippery.
• Restores the original properties of protective PPF film.
• Can be used to wash all exterior parts of the car, such as windows, plastics or alloy wheels.
• Completely safe on all previously applied ceramic protections.
• Can be used as shampoo or active foam.
• Highly concentrated.
• Consumption per 1 car: 20 to 30 ml.
• Recommended dilution: 1:500.

• Never wash the car in direct sunlight, but ideally in the shade, or in the evening and early morning hours.
• The car body must be cool to the touch.
• First rinse the car with pressurized water, it is necessary to remove coarse dirt from the body.
• Dilute the shampoo in a ratio of 1:500 (20 ml per 10 liters of water). We recommend using warm water.
• Using a hose with running water, create foam in the bucket.
• Then always wash the car from top to bottom, preferably with a wash mitt.
• Wash the body with straight strokes, not circular ones, and do not press too hard on the wash mitt.
• Leave the shampoo on the body for 3 to 5 minutes.
• Finally, rinse the car with a stronger stream of water and dry with a quality drying towel.

• Dilute the shampoo in a ratio of 30 ml of product per 500 ml of water.
• We recommend using warm water.
• Before applying to the body, perform a rinse with clean water using a pressure washer.
• It is necessary to get rid of coarse dirt and thus increase the washing effect of the decontamination car shampoo.
• After rinsing, spray the solution as active foam on the body and leave for 2 to 3 minutes.
• Then rinse thoroughly.